Ir directamente al contenido
NIBBI RACING

Honda CR500 Reborn: Brought Back to Life with NIBBI Carburetor

NIBBI RACING JOURNAL · BIKES AND BEARDS

Honda CR500.
Keep the story alive.

An Air Striker carburetor, a fresh set of controls, and another chapter for Sean’s classic two-stroke.

The Honda CR500 belongs to Sean from Bikes and Beards. Our NIBBI Racing colleague Jordan carries out the upgrade: a NIBBI Air Striker carburetor, quarter-turn throttle and throttle cable, with attention to setup before riding. For us, it is a chance to help a classic two-stroke keep doing what its owner enjoys.

NIBBI Racing brand artwork featuring a silver carburetor and the message Keep Two-Strokes Alive
01 / THE PROJECT

A Honda CR500 Carburetor Upgrade with a Clear Purpose

A motorcycle can spend time in storage without losing its place in a rider’s life. At the start of the CR500 segment, Sean explains that his bike has been sitting for a while. When Jordan offers to work on it, the project becomes a chance to get it back out riding.

Jordan discusses a challenge he encounters with older motorcycles: finding the right carburetor components when an existing unit needs attention. His approach here is to replace the original Keihin carburetor with a NIBBI unit, updating the fueling hardware while preserving the character that makes Sean want to ride the bike.

For an owner, a project like this starts with practical questions: which parts can be sourced, how they will fit the existing motorcycle, and what work is needed before the next ride. In the video, Jordan frames his choice around price, value and the ease of replacing an aging carburetor. Those considerations give the CR500 upgrade a purpose beyond simply adding a new component.

Image placeholder
JORDAN & SEAN INSPECT THE CR500
CR500The motorcycleHonda two-stroke
SeanThe ownerBikes and Beards
JordanThe builderNIBBI Racing team
NIBBI PWK38The upgradeCarburetor & controls

This is where we want NIBBI Racing to be useful: at the workbench, helping riders move a project forward with parts they can select, set up and put to use.

We see supporting older motorcycles as an ongoing responsibility for NIBBI. Riders bring the machines, the experience and the reasons to keep them. Our role is to keep developing options that make their next workshop decision easier to understand. Sean’s CR500 is one specific example of that work, with Jordan explaining his choices as the project develops.

02 / CARBURETOR DESIGN

What Jordan Explains About the NIBBI Air Striker

Airflow, with low-rpm use in mind.

With the original Keihin and the NIBBI carburetor side by side, Jordan points to two fins in the NIBBI Air Striker’s inlet. He explains that they help direct incoming air toward the venturi, with particular attention to the engine’s response at lower rpm.

His example is specific: moving through the woods, holding a gear and asking the engine to pull without immediately shifting down. That is the behavior he focuses on when discussing the design.

Later, Jordan explains that he chose a classic-looking NIBBI carburetor to suit the CR500’s vintage style. Updating the hardware can still leave the bike’s original character recognizable.

NIBBI PWK38 Sport Version carburetor with jets, official product photograph
PRODUCT REFERENCE / NIBBI PWK38 SPORT VERSION

A design discussion rooted in how the bike will be ridden.

Jordan’s woods-riding example gives the Air Striker discussion a useful context. He is interested in how the engine responds when the rider stays in a gear and asks it to work at lower rpm. That is his explanation of the design’s intended benefit; the video does not include a measured torque comparison. It does, however, make his priorities clear: consider the riding situation, then explain why a particular component was chosen.

At the farm, Jordan also describes NIBBI’s use of its own castings and redesign work on its carburetor range. For us, that development effort belongs alongside the hands-on installation. The component must make sense both as an engineered part and as something a rider will live with on a familiar motorcycle.

03 / CONTROLS & SETUP

Pairing the Carburetor with a NIBBI Throttle and Cable

The connections matter.

During the workshop segment, Jordan identifies a NIBBI quarter-turn throttle and NIBBI throttle cable being fitted to Sean’s CR500. He says the cable used on this build matches the bike’s stock length.

With the carburetor installed and the bike back together, his next step is to start it and check that the jetting suits the elevation and temperature that day. Then he plans to take it to Sean’s farm.

Selecting the parts, checking how they work together and adjusting the motorcycle for its riding conditions are all part of the job.

Black NIBBI twist throttle assembly, throttle cable and two handlebar grips
PRODUCT REFERENCE / NIBBI TWIST THROTTLE KIT
PARTS WORKING TOGETHER

Carburetor + controls

The project combines a carburetor replacement with a throttle and cable update. Jordan discusses the cable match for this particular CR500.

SETUP FOR THE DAY

Elevation + temperature

Jordan plans to check the jetting against local conditions.

One system, from the rider’s hand to the carburetor.

The throttle, cable and carburetor form a connected control system. The throttle operates the cable, and the cable operates the carburetor slide. Looking at them together helps explain why this build includes all three. A cable’s length is one part of the match; its end fittings, routing and the travel required by the carburetor also belong in the selection process.

Jordan’s comment about checking the jetting adds another important part of the story. Installation is followed by setup for the conditions in which the motorcycle will run. The footage records his intention to check that setup, but does not give final jet sizes. For readers planning a similar project, the useful takeaway is the sequence: choose compatible components, complete the installation, then assess the setup on the actual motorcycle.

Image placeholder
JORDAN TEST RIDES THE REVIVED CR500
04 / BACK AT THE FARM

The CR500 Gets Its Turn

When Jordan brings the completed CR500 to the farm, the conversation returns to why the project matters. Sean talks about the difficulty of sourcing carburetors for older bikes and welcomes companies that continue making parts for them. Jordan explains NIBBI’s work on its own carburetor designs and his enthusiasm for keeping two-strokes in use.

The following segment puts the motorcycle back into the riding story. The on-camera comment “First time, first try” accompanies the starting sequence, and Jordan returns to the Air Striker design and the bike’s classic appearance. These moments show the completed project in use and the riders’ immediate reactions.

THE NEXT RIDE / SEAN’S HONDA CR500

For NIBBI Racing, that is a meaningful outcome: parts fitted, setup considered, and an older motorcycle back out being enjoyed.

Sean’s response also brings the conversation back to access. He appreciates that companies continue making parts for older motorcycles and describes NIBBI’s pricing as affordable. That feedback matters to us because a replacement part has value when it helps an owner carry a project through to use. Here, the workshop decisions lead to a recognizable CR500, a conversation between riders and another outing at the farm.

05 / YOUR NEXT PROJECT

Explore NIBBI Parts for Your Own Build

If Sean’s CR500 has you thinking about your own motorcycle, these NIBBI products are a starting point for exploring a carburetor and control update.

Start with the motorcycle’s current configuration. A Honda CR500 carburetor upgrade calls for attention to the intake connections and controls as well as the carburetor itself. Jordan also makes clear that NIBBI does not offer a solution for every unusual model or layout. Matching the parts to your own build is part of making a useful choice.

NIBBI PWK38 Sport Version carburetor with jets, official product photograph
FUEL SYSTEM / SPORT VERSION

NIBBI PWK38 Carburetor

A 38 mm carburetor with tunable jetting. Compare the mounting dimensions, intake connections and throttle-cable configuration with your motorcycle before choosing.

Explore PWK38 Sport
Black NIBBI twist throttle assembly, throttle cable and two handlebar grips
CONTROLS / THROTTLE, CABLE & GRIPS

NIBBI Twist Throttle Kit

A twist throttle assembly, throttle cable and pair of grips. Listed for standard 22 mm handlebars; also confirm cable fit and carburetor compatibility for your setup.

Explore the Throttle Kit

The video identifies a NIBBI Air Striker carburetor, quarter-turn throttle and cable. 

06 / OUR BELIEF

Give the Next Ride a Future

At NIBBI Racing, we believe the future of riding includes the motorcycles that riders already love. Supporting those machines means continuing to develop useful parts, paying attention to real setup challenges and listening to the people who keep them running.

Sean’s CR500 gives that belief a tangible form. A bike comes out of storage. Parts are fitted. Time is spent on the setup. Then the rider gets another opportunity to enjoy it.

Keeping two-strokes alive also means keeping practical knowledge in circulation: why a part was selected, how it connects to the rest of the machine and what needs attention before riding. When Jordan shares those decisions, the story reaches beyond this one CR500. It gives other owners something concrete to consider as they work on the motorcycles in their own garages.

PURPOSEFUL ENGINEERING. A RIDER’S PERSPECTIVE.

Our vision is to help more riders take that next step—from a motorcycle waiting in the garage to a machine ready for its next chapter. Through purposeful engineering and a commitment to off-road culture, we want to help carry the knowledge, enthusiasm and experience of riding into the next generation.

KEEPTWO-STROKESALIVE.

Keep the next ride possible.

SOURCE VIDEO / BIKES AND BEARDS

See the Build for Yourself

The original Bikes and Beards video documents the CR500 project described above. Explore the workshop explanation, the completed bike and the riding footage through these five selected moments.

THE BUILD / BIKES AND BEARDSWatch on YouTube

Original video: “Dealers HATE That I Bought This Motorcycle Here” by Bikes and Beards.

Build story: Bikes and Beards. Workshop work: Jordan, NIBBI Racing. Video credit: Bikes and Beards on YouTube. Product photography: NIBBI Racing.

Deja un comentario

Su dirección de correo electrónico no será publicada..

Carrito 0

Su carrito está vacío.

Empieza a comprar